Products
NEWSLETTER
Subscribe free newsletter to get latest products and discount information.
J30J rectangular electrical connector
Micro rectangular electrical connector
Stock：


Main technical features ambient temperature:-55 ~ + 125 °C relative humidity: + 40 °c up to 95% VIBRATION: 10 ~ 2000HZ 196m/s 2 impact: 735m/s 2 acceleration: 735m/s 2 rated current: 3A Contact Resistance: ≤10m insulation resistance: dielectric Withstand Voltage: 800V Mechanical Life: 500 times J30j modified J30J-A series products: 1. The connecting mode of contact parts and conductors is CRIMP type; 2. The product comes with shielded clamp and shielded net; 3. The outlet direction of the product is the same as the plug plug and socket. J30J-C series products: 1. The connecting mode of the product contact parts and wires is crimp connection type; 2. The outlet direction of the products is 90 ° with the plug socket plug plug and pull direction; 3. This series can only be used with type L, K, K 1 locking components. J30J-D series products: 1. The connecting mode of contact parts and wires is compression type; 2. It is mainly used for the application of anti-rotation requirement of installation screw; 3. This series can only be used with type P, P 1, P 8, P 9 locking components.

Details
Comply with GJB2446 "General Specification for Shell Positioning Subminiature Rectangular Electrical Connectors" (equivalent to US military standard MIL-C-83513), interchangeable with American MDM series products and domestic similar products, and aluminum alloy is added to the J30 series products Shell and various aluminum alloy tail clamps; using stranded pin (commonly known as twist pin), a single contact has seven contact points, which improves the contact reliability of the product; using 1.27mm grid, the contact has high density and volume Small and light weight; there are currently 9, 15, 21, 25, 31, 37, 51, 66, 74, 100 cores, 10 types of spectra are available; applicable wire core cross-sectional area is 0.07～0.15mm2, tail end Wiring can be done according to user requirements; the locking components of this product are provided as assembled with the product. If the locking components are not required, please indicate in the contract; this series of products meet GJB2446 "General Specification for Housing Positioning Ultra-small Rectangular Electrical Connectors" "The requirements of this series of products are as follows: Q/ZHDZ GC-18 "J30J Series Micro Rectangular Electrical Connector Detailed Specification".

J30J-Q series products:
1. The connection method of the product contact and the wire is crimp type;
2．The shell is wider than other products of the same type.
J30J-AD series products:
1. The connection method of the product contact and the wire is crimp type;
2．The product comes with shielding clamp and shielding net;
3. This series can only be used with P, P1, P8, P9 type locking components.
Product mark code
J30J-× TJ/ZK × ×-× ×
① ② ③ ④ ⑤ ⑥ ⑦ ①-
Design serial number ②-
Contact arrangement: 9, 15, 21, 25, 31, 37, 51, 66, 74, 100
③-Types of connectors and contacts:
TJ—plug with pin ZK—socket with jack Z—socket K—jack
TJ and ZK are fixed collocations, usually connectors containing TJ letters are plugs; connections containing ZK letters The device is a socket.
④-Indicating the contact terminal connection form: Not indicating—Crimp S—Welding N—In-line printed board W—Bent printed board
⑤-Locking component category: See J30J locking component
⑥-Surface coating: Not indicated—nickel-plated G—cadmium-plated
⑦-modification: A—with shielded network clamp at the end of the shell D—with an anti-rotation groove on the butt end of the shell flange
J—the printed board grid spacing is 1.27×2.54 (column × line) Q—
Example of the marking of the widened shell flange :
J30J–51ZKP–GAD: indicates that the number of contacts is 51, the socket is installed with a jack, and the end of the contact is changed to a crimping type, with a P-type locking component, and the shell is plated Cadmium, J30J fixed end connector with shielded network clamp at the end of the shell and anti-rotation groove on the shell flange.