●Contacts are welded
●Bayonet connection
●It has a combined structure, complete varieties and specifications, and large current
●Reliable locking, easy to use, anti-misplugging, etc.
Scope of application
Y17 series bayonet type circular electrical connectors can be widely used in circuit connection between various electrical equipment.
Environmental conditions
Working temperature -55℃～125℃(175℃*)
Relative humidity 92%～98% relative humidity at 40±2℃
Working pressure 101.33KPa～4.4KPa
101.33KPa～1.33Pa**
Sinusoidal vibration 10～2000Hz, acceleration 98m/s2
10～2000Hz acceleration 196m/s2**
Impact acceleration 490 m/s2
Acceleration 980 m/s2 **
Collision acceleration 392 m/s2
Salt fog 48h
Note: *Only applicable to 1604 specification; **Only applicable to 2804 and 2824 specification.
Main technical characteristics
Operating current and contact resistance
|
Diameter of contact pair (mm) |
1.5 |
2.5 |
3.5 |
5 |
7 |
10 |
|
|
Working current (A) |
10 |
25 |
50 |
30* |
75 |
100 |
200 |
|
Contact resistance (mΩ) |
≤3 |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
|
|
|
|
|
|
|
|
|
|
Note: *Only applicable to 1604 specification.
Insulation resistance
|
Standard atmospheric conditions |
Hot and humid conditions |
High temperature conditions |
|
≥1000 MΩ |
≥20 MΩ |
≥500 MΩ |
Withstand voltage
|
Standard atmospheric conditions |
Hot and humid conditions |
Low pressure conditions |
|
AC 1000Vrms |
AC 500Vrms |
AC 250Vrms |
Model mark
|
Codename |
Y |
17 |
P |
- |
20 |
19 |
Z |
J |
10 |
- |
2a |
|
Serial number |
① |
② |
③ |
|
④ |
⑤ |
⑥ |
⑦ |
⑧ |
|
⑨ |
① Circular electrical connector
② Design serial number
③ Category number: P-shielded type, P*-shell grounding type, A-improved type, common type is not marked
④ Shell number: 10, 12, 16, 20, 28
⑤ Number of cores: 01, 03, 04, 07, 12, 19, 24
⑥ Electrical connector category: T-plug, Z-socket
⑦ Contact type: J-pin, K-jack
⑧ Socket installation method: 10-square panel type, 11-round panel type
⑨ Tail cover form: 2-clamping plate type
2a-Large clamp wire plate type (only No. 20 shell)
2b-Small clamping wire plate type (only No. 20 shell)
3- potting type
4-90° curved
5-Thermoplastic casing type I
5a-Thermoplastic casing type Ⅱ
6-shielded
Note: ⑧-The socket installation method sign only has the socket, but the plug does not have this sign; when the tail cover form is in the plug model sign, the-between ⑧ and ⑨ is not noted, such as: Y17P-2019TK2a.